Tag: Engineering Assignment Help

The Li-ion battery has quickly become the battery of choice for a number of portable electronic and mobile applications,

The Li-ion battery has quickly become the battery of choice for a number of portable electronic and mobile applications, surpassing the rechargeable batteries using aqueous electrolytes that were previously used (e.g., NiMH, Ni-Cd, Pb-acid).
Identify a type of device or commercial product that is currently powered by a Li-ion battery, but may have been powered by an aqueous rechargeable battery in the previous versions. The product need not be manufactured by the same company. As an example where the device is an electric car, Tesla uses Li-ion batteries in their cars, while the first Toyota Prius used a NiMH battery. Address all the points below.
a) What are the specifications of the Li-ion battery being used (e.g., energy/capacity/voltage,
dimensions, weight/volume) and some relevant performance characteristics (e.g., time it can be
used before needing to be recharged)?
b) Repeat part a), but for the aqueous battery used in the legacy version of the device.
c) Provide an explanation for why these particular aqueous batteries were initially chosen for the
application (if not specified, include your own opinions, and justify them).
d) Explain what kind of advantages and benefits have been enabled by the implementation of Li ion batteries in the device. Describe disadvantages, if applicable.
e) Please provide links or full citations to all sources used.[supanova_question]

Life-Cycle Assessment of Natural Gas

Engineering Assignment Help Please refer to the instructions attached along with two papers I found very useful and can build the skeleton of the project proposal. You may identify other papers as you like.

Note the following:
1) No LCA of natural gas and nuclear power plants done in Saudi Arabia. This should be highlighted in the Method section part.
2) GaBi Software will be used to support our project. This should be included somewhere in the project proposal, either under literature review or methods. Please look up GaBi in the internet to get a better understanding of what it is.[supanova_question]

We’re supposed to create a timesheet. Our idea is that the employee has several tasks per day. In order

We’re supposed to create a timesheet. Our idea is that the employee has several tasks per day. In order for him to move from task to another he should finish the first task and tick it in the timesheet. else he won’t be able to move from task to another by doing so the supervisor and the client can keep track of what the employee have accomplished and how long did it take him to accomplish a certain task. If the employee did not finish a certain task in the specific time he gets an extension to complete the task in order for him to move to the next task. Also if the employee did not accomplish anything during the day he gets a warranting from his supervisor.[supanova_question]

1. Identify what this picture is about 2. It is a propeller rudder mechanism of a drill ship in

1. Identify what this picture is about

2. It is a propeller rudder mechanism of a drill ship in a dry dock

3. What is wrong with it
Can it be fixed
4. What needs to be changed
Describe with scatchees to the best of your ability
You may use sketches drawings from internet
[supanova_question]

Question related to FLUID MECHANICS. Any water resources engineer here??

Engineering Assignment Help A tube ABCD has the end A open to atmosphere and the end D closed as shown in figure below. The portion ABC is vertical while the portion CD is a quadrant of radius 250 mm with it’s center B, the whole being arranged to rotate about it’s vertical axis ABC. If the tube is completely filled with water to a height in the vertical limb of 300 mm above C, find (a) the speed of rotation which will make the pressure head at D equal to pressure head at C, (b) the value and position of the maximum pressure head in the curved portion CD when running at the speed.
[supanova_question]

Engineering Question

System Reliability Assignment with a case study. I prefer to write the Building Services such as ACMV system reliability or BMS system reliability or Fire Protection System Reliability. Please provide the reference resources (Research paper, weblink).
Abstract
Introduction
Literature review
Case Study
Improving the System Reliability of the System
Discussion
Conclusion
References
Appendix (if any)
[supanova_question]

Soil mechanics lab report due Tuesday 1159

I added a report sample in the file (The report is like the sample but without the introduction part starting from the calculations), so I need something close to it using the information I also added in the files. so please check the files carefully and it’s due Tuesday. if you need any extra info just let me know. for the conclusion and discussion there is couple questions in the folders you have to answer please.
thanks in advance.
HOW will the grades be distributed::: Presentation 8 pts References 2 pts Cover 5 pts Calculations 10 pts Results 20 pts Discussion 20 pts Conclusion 10 pts
[supanova_question]

Industrial Engineering Lab report

Engineering Assignment Help Reminders for when writing your reports:
This is a technical report, avoid using first person language
Read over other group members section to avoid overlap
Use the report rubric for guidance on what to put in each section
Include the name of who wrote each section, this is very important because you will be graded as a group and individually
Standard Length Requirements (Single Spaced [supanova_question]

I added a report sample in the file (The report is like the sample but without the introduction part starting

I added a report sample in the file (The report is like the sample but without the introduction part starting from the calculations), so I need something close to it using the information I also added in the files. so please check the files carefully and it’s due Tuesday. if you need any extra info just let me know. for the conclusion and discussion there is couple questions in the folders you have to answer please. thanks in advance. HOW will the grades be distributed::: Presentation 8 pts References 2 pts Cover 5 pts Calculations 10 pts Results 20 pts Discussion 20 pts Conclusion 10 pts[supanova_question]

SIMIO software help

Hello,
I have this SIMIO assignment I need you to solve it and explain each step how you did it exactly so I can understand it.
Q:
For this question, refer to Simio model “Assignment3_InitialStationModel.spfx”. Make edits to the model to reflect the following scenarios below. Hand in a final Simio model and title it “Assignment3_InitialStationModel_.spfx” [10 Points]
Note: In the process of making these edits, you are free to change any simulation parameter you wish. This includes changing the type of path objects (ie: switching a path to a connector or vice versa).
-Server2 should have a percentage of time dedicated to the blocked state (after you fast forward through the entire model).
-The entities should be shown lining up on the path object into Server1 – without passing
-Entities should be shown on the output buffer of Server1
-Add status label boxes which show the # of entities currently processing in Server1, and the number of entities in the output buffer of Server1.
[supanova_question]

SIMIO software help

Engineering Assignment Help Hello,
I have this SIMIO assignment I need you to solve it and explain each step how you did it exactly so I can understand it.
Q:
For this question, refer to Simio model “Assignment3_InitialStationModel.spfx”. Make edits to the model to reflect the following scenarios below. Hand in a final Simio model and title it “Assignment3_InitialStationModel_.spfx” [10 Points]
Note: In the process of making these edits, you are free to change any simulation parameter you wish. This includes changing the type of path objects (ie: switching a path to a connector or vice versa).
-Server2 should have a percentage of time dedicated to the blocked state (after you fast forward through the entire model).
-The entities should be shown lining up on the path object into Server1 – without passing
-Entities should be shown on the output buffer of Server1
-Add status label boxes which show the # of entities currently processing in Server1, and the number of entities in the output buffer of Server1.
[supanova_question]

I need a report on ” Ion Thrusters for Small Sats”

The report about “Ion thrusters for small sats”
Include the Most recent developments and trends in electrical propulsion.
Guidance: Study/analyze technologies used by Spacecrafts, CubeSats and Ground Segments. Search for

info on the web:
Search for articles – mostly conference papers
Pay particular attention to MS and PhD Thesis coming from a team
List references to interesting materials used in the report.
Write a technical report
Include pictures
Include references
[supanova_question]

Civil Engineering Question

Cut and cover methods are used quite often for pipelines and structures below but near the ground surface. Suppose you are going to work on a structure where the roof of the structure is located 10 feet below grade. Now suppose this structure is going to be located under a heavily used roadway in town. There are buildings along both sides of the roadway and multiple utilities located in the 10 feet of ground above the roof of the structure.
Groundwater is located 2.5 feet below the ground surface and when excavated, the ground shows moderate inflow to the excavation.
The contractor cannot decide if he should excavate from the top down or the bottom up. There are some issues associated with what work would have to be performed which would help in his decision making. Which excavation would you suggest to the contractor, what concerns would you advise him on and what would you advise him to do? please answer the above with one to two paragraphs.
– answer the following in a separate document –> Describe the various types of dewatering that can be used under varying circumstances. What are the good and bad aspects of each type? When dewatering a site, there is potential that there will be settlement of the ground surface and structures. What ways can be used to mitigate the effects of dewatering on structures? Groundwater solutions are very important to the design and construction of underground works. In a list of five or more solutions, briefly describe each solution and its possible resultant effect . This exercise encourages you to look at a topic of high importance to any underground excavation. Addressing groundwater can be a difficult problem to resolve, and it is quite helpful to understand the options available. Problems associated with groundwater dewatering can be significant, and you will know what to look for should significant dewatering be required. You are asked to consider the options available and select a method that is most appropriate for the circumstances.
[supanova_question]

Engineering Question

Engineering Assignment Help Hello,
I have this SIMIO assignment I need you to solve it and explain each step how you did it exactly so I can understand it.
Q:
For this question, refer to Simio model “Assignment3_InitialStationModel.spfx”. Make edits to the model to reflect the following scenarios below. Hand in a final Simio model and title it “Assignment3_InitialStationModel_.spfx” [10 Points]
Note: In the process of making these edits, you are free to change any simulation parameter you wish. This includes changing the type of path objects (ie: switching a path to a connector or vice versa).
-Server2 should have a percentage of time dedicated to the blocked state (after you fast forward through the entire model).
-The entities should be shown lining up on the path object into Server1 – without passing
-Entities should be shown on the output buffer of Server1
-Add status label boxes which show the # of entities currently processing in Server1, and the number of entities in the output buffer of Server1.
[supanova_question]

CVE4074: Leading Construction Operation

1. Give an example of an authoritative directive that people commonly obey and an example of an authoritative directive that people do not commonly obey. Explain your example in terms of the elements of an authoritative directive (200-300 words).
2. You have just graduated from the university and accepted a job with a construction company. The CEO assigned you to a team tasked with recommending a new organization for the company. The company’s functions and number of people assigned to each function are below. Prepare an organization chart and a short written explanation of how you decided on the structure. You must name the positions and show recommended lines of authority and communications on your organization chart. You may group functions for efficiency, however if you do you must indicate who is the person responsible for sub-functions.
Functions – number of staff CEO/General Manager Chief Estimator Accountant – 2 Estimators – 2 Receptionist Chief Surveyor Executive Secretary Surveyors – 2 Legal Advisor Purchasing specialist Chief of Logistics Construction Project Managers – 3 Field Superintendents – 6 Chief of Human Resources Chief of Operations Marketing [supanova_question]

find net area steel

Determine the net area of the given section below. Diameter of bolts is 7/8-in and the thickness of the plate is 3/8″, in. The channel used is C8x15 and the plate in between the channels are 10″ in width.
Select one:
a. 6.69
b. 3.43
c. 2.25
d. 5.75
[supanova_question]

Civil Engineering Question

Engineering Assignment Help Cut and cover methods are used quite often for pipelines and structures below but near the ground surface. Suppose you are going to work on a structure where the roof of the structure is located 10 feet below grade. Now suppose this structure is going to be located under a heavily used roadway in town. There are buildings along both sides of the roadway and multiple utilities located in the 10 feet of ground above the roof of the structure.
Groundwater is located 2.5 feet below the ground surface and when excavated, the ground shows moderate inflow to the excavation.
The contractor cannot decide if he should excavate from the top down or the bottom up. There are some issues associated with what work would have to be performed which would help in his decision making. Which excavation would you suggest to the contractor, what concerns would you advise him on and what would you advise him to do? please answer the above with one to two paragraphs.
– answer the following in a separate document –> Describe the various types of dewatering that can be used under varying circumstances. What are the good and bad aspects of each type? When dewatering a site, there is potential that there will be settlement of the ground surface and structures. What ways can be used to mitigate the effects of dewatering on structures? Groundwater solutions are very important to the design and construction of underground works. In a list of five or more solutions, briefly describe each solution and its possible resultant effect . This exercise encourages you to look at a topic of high importance to any underground excavation. Addressing groundwater can be a difficult problem to resolve, and it is quite helpful to understand the options available. Problems associated with groundwater dewatering can be significant, and you will know what to look for should significant dewatering be required. You are asked to consider the options available and select a method that is most appropriate for the circumstances.
[supanova_question]

Aerospace Engineering Question

The style required for formatting the paper is the American Psychological Association (APA) guidelines. The paper will be graded on originality, accuracy, and completeness of information, cohesiveness, spelling, grammar, and the inclusion of quality references. The paper must be a minimum of five (5) pages of content (double-spaced, one-inch margins, and Times Roman 12-point font). A minimum of five (5) quality references, appropriately cited in the text, and appropriately listed on the reference page. In addition to the five pages of content, a title page and works cited/reference list are required.
[supanova_question]

Summarizing

This exercise asks you to gather various types of research to solve a local problem. For this exercise, you need to find and summarize.
You need to choose three different types of research from the list below:
Newspapers (local, university, national)
Reports or websites from government agencies, universities, and/or NGOs
Scholarly research (reports or websites on a topic rather than academic articles)
Facts and statistics compiled by government agencies and/or NGOs
Interviews with experts and/or impacted individuals
Surveys (social media makes doing surveys easy)
Once you select three pieces of research that can help you solve your problem, you need to summarize one piece.
Your summaries should contain:
What is the purpose of the article or source?
Identify three pieces of evidence (quotes, statistics, percentages, etc.) that explain, relate to, or support your problem
Provide an overview of how you can use the research to explain or solve the problem
Explain how you know the research is trustworthy or reputable
[supanova_question]

Analysis of Research-Based Report

Engineering Assignment Help This activity asks you to analyze a report that uses research to accomplish its purpose.
Pick one of these reports to analyze:
[ATTACHED]
As you skim the report, focus on the research included in each section. As you do, answer the following questions:
What is the purpose of the report?
What types of research do you see in the report? (Think back to Ch. 2 from Just Enough Research.)
How is the research being used?
How does the research contribute to the achievement of the report’s purpose?
Which sections have the most research? Why do you suppose that is?
Your analysis of the report should develop a sense of the role of research in professional and technical document.[supanova_question]

Standard Emergency Plan SERP

In a 3 page paper, the equivalent of 500 words, ( /- 10%), assume the role of ARFF Commander. From your lessons learned of the Ramstein Airshow Disaster, explain how you would modify the emergency response plan for future airshows at the Ramstein Airbase.
Some key lessons learned:
There were hundreds of people running in all directions away from the explosion which hampered ARFF movement.
Radio communications were blocked due to language differences (English and German).
Parking for the show bottlenecked emergency response from civilian hospitals.
As you study this disaster, feel free to list other things that might have caused delays in rescue. Take note of page 488 of our text as you prepare your SERP.
This the book if you cannot get access no big deal
Title: Aircraft Rescue and Fire Fighting

ISBN: 978-0879395841
Authors: International Fire Service Training Association
Publisher: Fire Protection Publications
Publication Date: 2015
Edition: 6th
Format: Textbook
[supanova_question]

Need help redo for Rtypedatapath ( required need to know and used Vivado before) with solution given

I got the lab for Rtypedatapath attached bellow and I already got the solution for this Rtypedatapath attached bellow. please read the instruction from lab and guide me to do it again:
First guide draw block design , second help to to put these vhd, alu…. to vivado (step by step) include run simulation as same as the result. Third, explain clearly what we add on a new vhd which is different with vhd given (why we do it and how it connect these together)
[supanova_question]

Need help redo for Rtypedatapath ( required need to know and used Vivado before) with solution given

Engineering Assignment Help I got the lab for Rtypedatapath attached bellow and I already got the solution for this Rtypedatapath attached bellow. please read the instruction from lab and guide me to do it again:
First guide draw block design , second help to to put these vhd, alu…. to vivado (step by step) include run simulation as same as the result. Third, explain clearly what we add on a new vhd which is different with vhd given (why we do it and how it connect these together)
[supanova_question]

Need help redo for Rtypedatapath ( required need to know and used Vivado before) with solution given

I got the lab for Rtypedatapath attached bellow and I already got the solution for this Rtypedatapath attached bellow. please read the instruction from lab and guide me to do it again:
First guide draw block design , second help to to put these vhd, alu…. to vivado (step by step) include run simulation as same as the result. Third, explain clearly what we add on a new vhd which is different with vhd given (why we do it and how it connect these together)
[supanova_question]

Lab Report For Analog Open Loop Motor Driver

All of the instructions are attached, including a template that should be followed.
ill provide more pictures of data that could be added to the report
When you start this report please be as detailed as possible and have good amount of writing
as for the procedures;
you should be writing descriptive paragraph on the setup and debugging and not rewrite the steps. Assume the reader is familiar with the procedure but needs to be made aware your specific setup, issues, and opportunities.
some debugs include misplacing the the wires on the physical circuit and connections in the wires. Also the use of multimeter where it wasnt reading accuratly was fixed by placing nodes in the connections of wires or misplacing the nodes and with professors help our group was able to figure out where to place the nodes to get reading for current specially and voltage sometimes
[supanova_question]

Homework 3

Engineering Assignment Help The problem statement for this assignment is shown below:
Spring 2022 CEG 4850 Capstone Assignment 3.
Below is an example of a solution to a similar problem:
Assignment_3 example.docx
The reference materials used in this example problem solution are:
Trans I Pavement Design Fall 2018.ppt
Flexible pavement design worksheet.xls
[supanova_question]

The Sustainable Development Goals

a) Explain what the Sustainable Development Goals are and
b) your role as an engineer in achieving the sustainable development goals (SDGs).
c) List five sustainable development goals you believe you can contribute to as a civil/environmental engineer and list two specific targets associated with each of the five SDGs you identified that a civil/environmental engineer you can contribute to. One of the five SDGs you select should be SDG 11 (Make cities and human settlements inclusive, safe, resilient, and sustainable).Reference Materials• Why is it so important for civil engineers to take sustainability seriously? – The Institution of Civil Engineers (ICE) is a professional membership body based in the U.K. with 95,000 civil engineer members. https://www.youtube.com/watch?v=o4FZKrZIOhg (Links to an external site.) (2.06 mins)• The Sustainable Development Goals – Action Towards 2030 https://www.youtube.com/watch?v=9-xdy1Jr2eg (Links to an external site.) (5.52 mins)• Emma Watson introduces The World’s Largest Lesson 2016 #2 – The Global Goals https://www.youtube.com/watch?v=sTt5YW7Pagc (Links to an external site.) (5.28 mins)• https://sdgs.un.org/goals (Links to an external site.) (SDGs are listed along with individual targets under each SDG)Role of engineers with SDGs• Why are the U.N.’s Sustainable Development Goals so important? https://www.youtube.com/watch?v=aVe0CtW8rxw (Links to an external site.) (1.55 mins)• Engineers: Leaders in Sustainable Infrastructure Development (makes a case for encouraging engineers to be leaders in sustainable development and offers insight on how Canada approaches sustainable design) https://www.youtube.com/watch?v=bAQGyE1gx6A (Links to an external site.) (2.45 mins)• Creating Sustainable Communities – Part I ASCE – Discussion on the role engineers play in the Partnership for Sustainable Communities https://www.youtube.com/watch?v=U-GfdWuviZY (Links to an external site.) (7.21 mins)
[supanova_question]

of this requirement is for you to have a conversation about where you are in your career development, what steps are up next, and the resources that you need to complete those steps. I’m at CU Boulder, mechanical engineering

The goal of this requirement is for you to have a conversation about where you are in your career development, what steps are up next, and the resources that you need to complete those steps. Participation Instructions: You have four options for completing the requirement: Reach out to an industry contact. This could be someone you know from outside of school, someone you met at a department networking event, or a new contact. It could even be a friend or family member. Schedule a time to meet and talk about where you’re headed and what you can learn from their experience, that could help you figure out your next steps. Resources for identifying a new contact are available here. Seek advice from a faculty member or TA. Reach out to someone whose work or professional path you’re interested in. Faculty are a great resource for many topics, including preparing for graduate school or getting involved in research. A faculty directory for Mechanical Engineering is available hereLinks to an external site.. Meet with a Student Apprentice. Student Apprentices are upper division students who have completed at least one internship and who serve in a leadership role in the department. If you haven’t completed an internship yet, they’re a great resource for navigating that process. Instructions for scheduling a meeting with an Apprentice are available hereLinks to an external site.. Schedule an appointment with either the ME Professional Development Advisor (aka Kat) or an Engineering Career Advisor. Instructions for scheduling an appointment with an Engineering Career Advisor are available hereLinks to an external site.. Getting Credit: Select “Submit Assignment” at the top of this page and compose a brief reflection using the provided text box. Make sure to include the following details: Who did you meet with for your career check-in? Please specify whether they are an industry contact, career advisor, etc. What is one question that you had going into the conversation? Were you able to make progress on answering that question? (2-3 sentences) What is the next step that you will take or the next goal that you have set for yourself, related to your career? (2-3 sentences) Any comments or suggestions (optional) I’m at CU Boulder, mechanical engineering. final year and I want to continue my studies as a masters student in mechanical engineering thermo science at University of Florida. and I met with Dr Abdulraheem Kalander – Head of mechanical engineering department at The Public Authority for Applied Education and Training in kuwait.[supanova_question]

is designed to maximize flexibility, while providing a structure each year to make sure that you’re consistently finding time to think about how the steps you take now as a student can prepare you to launch a meaningful, rewarding career after you graduate. There are options to reflect on work you’re already doing, to seek out and talk with a professional in your field of interest, or to participate in events that will help you develop a knowledge set and the connections that you need to succeed in your post-grad job search. You’re welcome to choose the options that make the most sense for you, given where you are in your education and your career. Each option requires a brief reflection. Please make sure that your reflections are appropriately detailed and thoughtfully written, including using paragraph breaks and correct spelling/grammar. Reflections can be submitted using the provided textbox or uploaded as PDF documents.

Engineering Assignment Help This requirement is designed to maximize flexibility, while providing a structure each year to make sure that you’re consistently finding time to think about how the steps you take now as a student can prepare you to launch a meaningful, rewarding career after you graduate. There are options to reflect on work you’re already doing, to seek out and talk with a professional in your field of interest, or to participate in events that will help you develop a knowledge set and the connections that you need to succeed in your post-grad job search. You’re welcome to choose the options that make the most sense for you, given where you are in your education and your career. Each option requires a brief reflection. Please make sure that your reflections are appropriately detailed and thoughtfully written, including using paragraph breaks and correct spelling/grammar. Reflections can be submitted using the provided textbox or uploaded as PDF documents.[supanova_question]

homework 3

The problem statement for this assignment is shown below:
Spring 2022 CEG 4850 Capstone Assignment 3.docx
Below is an example of a solution to a similar problem.
Assignment_3 example.docx
The reference materials used in this example problem solution are:
Trans I Pavement Design Fall 2018.ppt
Flexible pavement design worksheet.xls
[supanova_question]